Washer nozzles

( number of products: 1 )

Windshield Washer Nozzles currently includes 1 product – a set of 2 universal mist-style front windshield washer nozzles with 360° spray-direction adjustment. Their wide-angle spray pattern is designed to distribute washer fluid over a larger area of the windshield than conventional concentrated jet nozzles.

The nozzles are suitable for hoses with a maximum diameter of approximately 7 mm and each unit measures around 0.9 × 1.6 × 2.6 cm. The set also includes two seals and two mounting nuts. Spray direction can be adjusted using a flat screwdriver, helping users position the mist according to the vehicle's windshield.

Front windshield washer nozzles

A properly functioning washer system helps maintain visibility when the windshield becomes covered with dust, road spray, mud or other contamination.

The current category contains one set of two universal mist washer nozzles.

Mist spray design

Unlike concentrated jet washers, mist nozzles spread fluid over a wider windshield area.

This helps wet a larger section of glass before the wipers move across it.

Wide-angle spray

The current model uses wide-angle outlets intended to provide broad windshield coverage.

Two-piece set

The package contains two washer nozzles, allowing both front units to be replaced at the same time.

360-degree adjustment

Spray direction can be adjusted through 360°.

This allows the washer pattern to be aligned with the vehicle's windshield.

Flat-screwdriver adjustment

The spray outlets can be positioned using a flat screwdriver.

After installation, test the washers and make small adjustments until the windshield is covered effectively.

Universal design

The product is described as universal and suitable for many vehicle models.

Compatibility should still be checked before installation.

Maximum hose diameter

The maximum stated hose diameter is 7 mm.

Check the existing washer hose before ordering.

Nozzle dimensions

Each nozzle measures approximately 0.9 × 1.6 × 2.6 cm.

Black finish

The current version is supplied in black.

Seals included

The set contains two seals to support installation and fitment.

Mounting nuts

Two mounting nuts are also supplied.

When should washer nozzles be replaced?

Replacement may be useful when existing nozzles:

  • are damaged,
  • remain clogged,
  • spray unevenly,
  • cannot be adjusted correctly,
  • direct fluid away from the windshield.

Check the entire washer system

Poor spray does not always mean the nozzle itself is faulty.

Possible causes also include:

  • low washer fluid,
  • frozen fluid,
  • damaged washer pump,
  • disconnected hose,
  • blocked line,
  • leakage.

Washer nozzles and visibility

Correct fluid distribution is particularly important during:

  • rain,
  • winter road conditions,
  • night driving,
  • dusty weather,
  • long motorway journeys.

Working with windshield wipers

The washer system wets the glass, while the wipers remove dirt and excess liquid.

Correct spray positioning helps the two systems work together efficiently.

Installation

A general installation process may include:

  1. opening the bonnet,
  2. accessing the existing nozzle,
  3. disconnecting the washer hose,
  4. removing the old nozzle,
  5. inserting the replacement,
  6. fitting the seal and nut,
  7. reconnecting the hose,
  8. checking for leaks,
  9. adjusting the spray.

Compatibility checks

Before installation, compare:

  • hose diameter,
  • mounting-hole dimensions,
  • available space,
  • factory attachment design.

A universal product is not guaranteed to fit every vehicle without verification.

Winter use

Use washer fluid suitable for prevailing temperatures.

Frozen liquid can block hoses and nozzles and may damage components.

Cleaning

Minor dirt may sometimes be removed before deciding to replace the nozzle.

Avoid using tools that could permanently enlarge or damage the spray opening.

What is included?

The set contains:

  • 2 washer nozzles,
  • 2 seals,
  • 2 mounting nuts,
  • packaging.

Product identification

The current product code is 10060, with EAN 5907451332900.

Current availability

The product is currently marked as available in very large quantities.

Choosing washer nozzles

Consider:

  • spray type,
  • hose diameter,
  • mounting dimensions,
  • adjustment range,
  • nozzle size,
  • vehicle compatibility,
  • number of units included.

FAQ – FREQUENTLY ASKED QUESTIONS

1. How many products are currently listed?
There is currently 1 product.

2. What product is available?
A set of two universal mist-style front windshield washer nozzles.

3. How many nozzles are included?
Two.

4. Is the spray direction adjustable?
Yes. It offers 360° adjustment.

5. What type of spray do they provide?
A wide-angle mist spray.

6. What maximum hose diameter is supported?
Approximately 7 mm.

7. What are the nozzle dimensions?
Approximately 0.9 × 1.6 × 2.6 cm.

8. What colour are they?
Black.

9. What mounting accessories are included?
Two seals and two nuts.

10. Is the product currently available?
Yes. It is currently marked as available in very large quantities.

pixel