Suspension service tools

Suspension work requires correctly selected tools, particularly when working with compressed springs.

The current range includes spring compressors and a universal two-arm puller.

Spring compressors

The available set contains two steel spring compressors with a maximum length of approximately 380 mm and a spacing of around 80 mm.

Using two compressors allows force to be distributed on opposite sides of the spring.

Fine-thread construction

The compressors feature fine threads designed for gradual operation under load.

Their shaped hooks help hold the spring securely when correctly positioned.

Tool operation

The available model can be operated using a 1/2-inch ratchet or a 21 mm wrench.

Both compressors should be tightened gradually and evenly.

Spring-compression safety

Suspension springs can store a large amount of energy.

Before use, inspect the threads, hooks and tool body. Never use a compressor that is cracked, bent or visibly damaged.

Spring work should only be carried out by someone with appropriate knowledge and experience.

Universal two-arm puller

The second available product is an adjustable two-arm puller designed for selected:

• bearings,
• bushes,
• battery terminals,
• wiper arms,
• compatible alternator components.

Adjustable arms

The arms can be repositioned along guides to suit different compatible components.

The vertical working range is approximately 40–80 mm.

Steel construction

The puller is made from cast steel and measures approximately 11 × 7.5 × 3.5 cm.

Its compact size makes it easy to store in a workshop tool box.

Bearing removal

A puller provides controlled force when removing selected tightly fitted bearings or bushes.

Always ensure that both arms have secure and symmetrical contact points before applying force.

Wiper-arm removal

The puller can also be used for compatible wiper arms that are difficult to remove from their shafts.

It provides a more controlled alternative to levering parts with unsuitable tools.

How to position a puller

1. Adjust the arm spacing.
2. Position both hooks securely.
3. Centre the pressure screw.
4. Apply light tension.
5. Recheck alignment.
6. Increase force gradually.

Seized components

If a component does not move despite correct tool positioning, avoid unlimited force.

Reassess the setup and repair method before continuing.

Tool maintenance

After use:

1. remove dirt,
2. clean the threads,
3. dry metal surfaces,
4. inspect working parts,
5. store the tool in a dry place.

Choosing the correct puller

Check:

• intended task,
• working range,
• dimensions,
• spacing,
• drive method,
• material,
• compatibility.

Spring compressor or universal puller?

These tools have different purposes.

A spring compressor is designed to compress compatible suspension springs.

A two-arm puller is intended to remove selected bearings, bushes and other tightly fitted components.

One should not be used as a substitute for the other.

FAQ – FREQUENTLY ASKED QUESTIONS

1. How many products are currently available?
There are currently 2 products.

2. What tools are available?
A pair of spring compressors and an adjustable two-arm universal puller.

3. How long are the spring compressors?
Their maximum length is approximately 380 mm.

4. How many spring compressors are included?
The set contains two.

5. What are they made from?
Steel.

6. How are the spring compressors operated?
Using a compatible 1/2-inch ratchet or 21 mm wrench.

7. What is the working range of the universal puller?
Approximately 40–80 mm.

8. Can the puller be used for bearings?
Yes, for selected compatible bearings and bushes.

9. Can it remove wiper arms?
Yes. Compatible wiper arms are one of its listed applications.

10. What should I check before purchasing?
Check working range, dimensions, mounting method, material and compatibility with the component being serviced.