Back to the store

Sled

number of products: 3

Sledges and snow sliders offer a simple way for children to enjoy active winter play. The category includes a plastic sit-on slider, a large round snow disc with handles and a sledge featuring a backrest, side brakes and a pulling cord.

Compare the dimensions, construction and equipment of each model before ordering. Choose a product suited to the child’s age and abilities, and use it only on a safe slope away from roads, trees, open water and other obstacles.

Sledges and sliders for winter play

Snow sliding encourages children to spend time outdoors, but the type of ride depends on the product’s construction. A simple sit-on slider behaves differently from a round disc, while a model with a backrest and side brakes offers another seating and control arrangement.

The current range includes:

  • a classic sit-on slider with a front handle,
  • a 62 cm round snow disc,
  • a sledge with a backrest, two brakes and a pulling cord.

All three models are made from plastic and are lightweight enough to carry, but they differ in size, grip points and behaviour on a slope.

Choosing a sledge for a child

Begin by checking the dimensions and structure. The child should be able to sit comfortably, hold the intended handles and use the product according to its instructions.

Compare:

  • the child’s age and ability,
  • seat dimensions,
  • available handholds,
  • the presence of a backrest,
  • brakes and pulling cord,
  • overall size and weight,
  • ease of carrying uphill,
  • the permitted load stated for the model.

The product information does not provide one shared weight limit for the entire category. Do not assume that every slider is suitable for every user.

Sit-on snow slider with handle

The sit-on slider has a flat plastic seat and a front handle. Its simple construction makes it easy to carry and prepare for use.

The available model measures approximately 55 cm long. The seating area is about 26 × 37 cm, while the handle is approximately 17 cm wide. Blue, green and red variants are offered.

This slider does not have a backrest or side brakes. The child should remain seated and hold the handle throughout the descent. Choose a gentle route with no obstacles.

Large round snow disc

The round slider measures 62 cm in diameter and approximately 7 cm high. Handles on both sides provide places to hold during the ride.

Its circular shape means that the disc may rotate while moving downhill. The direction can therefore be less predictable than with a lengthwise sledge. It should be used only on a wide, gentle slope with plenty of clear space.

Blue, green and red colours are available. Select the preferred option during checkout; otherwise, a random colour may be supplied.

Sledge with backrest and side brakes

The model measuring approximately 37 × 65 × 10 cm includes a backrest, two side brakes and a pulling cord with a handle. The cord is about 50 cm long.

The side brakes may assist with slowing down and influencing direction. They do not guarantee an immediate stop in every situation. Their effectiveness depends on speed, snow conditions, gradient and correct use.

Before the first descent, let the child practise operating both brakes on flat or very gently sloping ground. Inspect the backrest, handles, brakes and cord before use.

Using the pulling cord

The cord is intended to help an adult pull the sledge over flat, snow-covered ground. Check its attachment and handle before starting.

When pulling:

  • make sure the child is seated securely,
  • walk at a controlled pace,
  • prevent the cord from wrapping around the body,
  • remain away from traffic,
  • never attach the sledge to a bicycle or motor vehicle.

Do not use the cord for towing during a descent. Keep it off the riding route when not in use to prevent tripping or entanglement.

Choosing a safe slope

The location is more important than the speed a sledge can achieve. The entire route should be visible and end in a sufficiently long, flat run-out area.

Do not ride near:

  • roads, car parks or pavements,
  • trees, posts and fences,
  • steps or walls,
  • frozen ponds and lakes,
  • steep drops,
  • ski routes,
  • crowded areas,
  • obstacles hidden beneath the snow.

Check that the route is clear before every descent. The next rider should wait until the previous person has left the stopping area.

Snow, ice and riding speed

The surface has a major effect on speed and control. Packed or icy snow can produce much faster descents and longer stopping distances. Even, softer snow generally provides more predictable conditions.

Do not use plastic sledges on exposed asphalt, concrete, stones or stairs. Hard surfaces may damage the product and increase the risk of injury.

If the hill is too fast, uneven or icy, choose another location rather than relying on the brakes alone.

Correct riding position

The child should sit facing forward and hold the designated handles. Do not ride while standing, kneeling, facing backwards or lying headfirst.

Never carry more riders than permitted by the product instructions. Sledges should not be linked into a train or attached to vehicles, lifts or other moving objects.

A properly fitted helmet may provide additional head protection during winter activities. Clothing should allow free movement and should not have loose parts that could catch on the sledge or nearby obstacles.

Adult supervision

Children may misjudge their speed, the slope gradient or the distance to an obstacle. An adult should inspect the route, explain the rules and observe every descent.

The amount of assistance should reflect the child’s age and ability. Younger riders may need help sitting down, carrying the sledge and leaving the stopping area.

Supervision is still necessary when a model has a backrest and brakes. These features do not eliminate risk or compensate for an unsuitable slope.

Inspecting a sledge before use

Low temperatures, impacts and repeated descents can affect plastic components. Inspect the entire product before every outing.

Check:

  • the plastic for cracks,
  • edges for sharp damage,
  • handle stability,
  • brake operation,
  • the cord for fraying,
  • all attachment points,
  • the underside for excessive wear.

Do not use a cracked or distorted slider. Improvised repairs may change how it behaves during a descent.

Cleaning and storage

Remove snow and dirt after use, then dry the product. Pay attention to recesses, brakes, handles and the cord attachment.

Store the sledge in a dry location away from high heat and heavy objects that could deform it. Do not place it next to a heater to accelerate drying.

Inspect the body and all moving components again before the next winter season.

FAQ – Frequently Asked Questions

1. Which types of sledges are available?
The range includes a sit-on slider with a handle, a 62 cm round snow disc and a sledge with a backrest, brakes and pulling cord.

2. How does a sit-on slider differ from a snow disc?
The sit-on slider has a lengthwise shape and front handle. The disc is circular, has side handles and may rotate during a descent.

3. What size is the sit-on slider?
It measures approximately 55 cm long, with a seating area of about 26 × 37 cm.

4. How large is the round snow disc?
The disc measures approximately 62 cm in diameter and 7 cm high.

5. What are the side brakes used for?
They may assist with slowing down and steering. They cannot guarantee an immediate stop in every snow condition.

6. Can the sledge be towed behind a vehicle?
No. The cord is intended only for an adult to pull the sledge calmly over flat, snow-covered ground.

7. Can I choose the colour?
The models are offered in blue, green and red. Select a colour during checkout; without a selection, a random variant may be supplied.

8. Can the sledge be used on an icy hill?
Icy surfaces can create excessive speed and poor control. Choose a gentle slope with an even layer of snow.

9. How should a plastic sledge be stored?
Dry it and store it away from heaters, high temperatures and heavy objects that could distort the plastic.

pixel