Bathroom and toilet

Bathroom and toilet accessories for practical upgrades

The current VERK range focuses on fittings connected to the water supply, replacement parts for sliding shower doors and simple accessories for the bath and toilet.

Compatibility should always be confirmed using measurements. A product described as universal cannot be assumed to fit every tap, hose, shower enclosure or mounting surface.

Multi-mode shower heads

The category includes shower heads with up to five spray settings. Depending on the model, the user can select a gentler, concentrated or combined flow.

Selected designs feature a replaceable filter or a button for temporarily stopping the water. White, black, grey and silver options are available. Although the five-function models use standard threads, the connection should still be compared with the existing shower hose.

The range also includes a turbine-style shower head with a replaceable filter, START/STOP button and a head that rotates through 360°. It measures 26 cm in total length and has an 8 cm spray face.

Individual shower heads and complete sets

If the current hose and holder remain suitable, replacing only the shower head may be sufficient. A complete kit is more appropriate when several components need to be changed.

The available five-function set includes a shower head, 150 cm hose and adhesive wall holder. The head has a flow-stop button, a diameter of 9 cm and a total length of 27 cm.

Another set connects to a basin tap and includes a compact spray head, 130 cm hose, holder, three-way valve, seals and a 24 mm adapter. The valve has a 22 mm internal thread. Both dimensions must be checked against the existing tap.

Handheld bidet sprayer

The handheld bidet sprayer has a button for controlling the water flow and a standard thread. The available model is made from plastic and aluminium and measures 12.5 × 6 cm.

The product page lists the spray head itself. Any hose, valve or other components required for a complete installation should therefore be checked separately. The final connection must allow the water supply to be shut off correctly.

Tap aerators and movable extensions

An aerator fits at the end of the tap spout and changes the direction or pattern of the water flow. The range includes compact rotating heads and longer articulated extensions.

Current options include:

• a 5.5 × 2 cm rotating aerator supplied with a connector and two seals,
• a 360° extension with an approximately 22 mm thread and two spray patterns,
• a 9.5 cm articulated 1080° extension with continuous and dispersed flow,
• a compact 3-in-1 aerator with a 24 mm thread.

Remove the existing fitting and measure the thread before ordering. Check whether the tap uses an internal or external thread and whether an adapter is required.

Replacement rollers for shower doors

Worn rollers may prevent shower doors from moving smoothly. The category includes eight-piece kits containing four upper and four lower rollers.

One version uses 23 mm wheels and is intended for an approximately 12 mm mounting hole. The second has 24 mm wheels and requires an 11–12 mm hole. Both are described as suitable for glass measuring 4–6 mm thick.

Measure the existing wheel, glass, mounting hole and complete mechanism. A similar appearance alone does not confirm compatibility.

Suction-cup bath pillow

The bath pillow supports the head, neck and upper back during bathing. The available model is made from 3D mesh and uses suction cups to remain in position.

It measures 32 × 30 × 7 cm and has a hook for hanging after use. Attach the suction cups to a clean, smooth surface, then rinse and leave the pillow to dry after bathing.

Motion-sensor toilet light

The toilet light produces coloured illumination when its motion sensor detects somebody nearby. A flexible arm adjusts its position, while a switch allows the unit to be turned off completely.

It requires three AAA batteries. The product provides supplementary toilet illumination and does not replace the bathroom’s main light. Keep the battery compartment away from direct contact with water.

What should you check before buying?

Important points include:

• thread type and diameter,
• shower-head and hose compatibility,
• shower-hose length,
• supplied mounting components,
• shower-door wheel and hole diameter,
• glass thickness,
• suction-cup or holder mounting surface,
• required batteries,
• spray settings and product colour.

Accurate measurements are essential for replacement components and accessories connected directly to a tap.

FAQ – Frequently Asked Questions

How do I choose a shower head?

Check the thread, spray settings, head dimensions and additional functions. Decide whether you need the shower head alone or a complete set with a hose and holder.

Do the filtered shower heads have replaceable cartridges?

Selected models have replaceable filters. Check the individual product page for the filter type and replacement details.

Does a STOP button replace turning off the mixer tap?

No. It is intended for temporarily pausing the flow. Close the water using the main tap control after the shower.

How do I select shower-door rollers?

Measure the wheel diameter, mounting hole, glass thickness and complete mechanism. The available kits use 23 or 24 mm wheels and are intended for 4–6 mm glass.

Will an aerator fit every tap?

No. Although the products are described as fitting most taps, the thread type, diameter and any required adapter must be checked.

How is the bath pillow attached?

Press the suction cups onto a clean, smooth bath surface. Check that the pillow is secure before resting against it.

How is the toilet light powered?

It requires three AAA batteries. Batteries are not listed as part of the supplied set.