Window Decorations

Practical window accessories for comfortable ventilation

An open window brings fresh air into a room, but it can also provide an easy route for flying insects. A fine mesh screen creates a barrier across the opening, making it more comfortable to ventilate a bedroom, living room, kitchen or another interior.

This category includes removable polyester insect screens installed directly on the existing frame. They use self-adhesive hook-and-loop tape, so no separate screen frame or drilling is required.

Hook-and-loop insect screens for windows

Installation involves attaching the adhesive-backed tape to a prepared frame and pressing the fitted mesh into position. Excess material can be trimmed after the screen has been aligned with the opening.

The mesh can be detached when the window needs cleaning or when the screen is not required. It can then be refitted, provided the mounting tape remains securely attached to the frame.

How to select the correct mesh size

The available screens measure 150 × 130 cm and 180 × 150 cm. As the polyester mesh can be cut, the selected sheet should be at least as large as the entire area that needs to be covered.

Measure the width and height of the opening as well as the available mounting space on the frame. Leave enough material around the edges to connect the mesh securely to the hook-and-loop tape.

Window sizes and frame widths vary, so relying on the phrase “standard window” may result in a poor fit. Taking accurate measurements is the most reliable way to select the correct option.

Insect screens for balcony and entrance doors

A larger mesh sheet can also be fitted to a balcony or entrance door if the dimensions fall within the usable size of the selected product. Before installation, check the positions of the handle and hinges and consider the direction in which the door opens.

The screen does not open automatically. For a frequently used doorway, it should be positioned so that the mesh can be detached and refitted without unnecessary difficulty.

White or black insect mesh?

The screens are available in white and black. The colour can be selected to coordinate with the window frame, exterior finish or surrounding interior.

White mesh pairs naturally with light-coloured frames. Black mesh may complement darker window or door frames and create a more defined outline. The final appearance will also depend on lighting and the colours visible through the window.

Regardless of colour, the mesh must be large enough to cover the opening and attach securely around its entire edge.

How to install a removable insect screen

1. Measure the opening and the available mounting surface.
2. Clean and degrease the frame thoroughly.
3. Cut the self-adhesive tape and attach it to the frame.
4. Leave the tape in place for approximately two hours.
5. Fit the mesh without stretching it excessively.
6. Check that it is attached around the entire opening.
7. Carefully trim any excess material.

Before using a degreasing product, make sure it is suitable for the material and finish of the frame. Testing it on a discreet area is advisable.

Why should the mesh not be stretched too tightly?

Excessive tension may make it more difficult for the screen to remain evenly attached to the hook-and-loop tape. The mesh should sit flat without being pulled too tightly. Check the edges before making the final cut.

Correct surface preparation is equally important. Dust, grease and moisture can weaken the adhesion of the mounting tape.

Cleaning and storing the screen

Light dirt can be removed with a damp cloth or by gently rinsing the mesh. The available screens can be washed at 30°C. Detach the material from the mounting tape before washing and check the care directions for the selected product.

Allow the screen to dry completely before refitting it. For off-season storage, clean and dry the mesh first, then fold it loosely to reduce permanent creasing.

What should you check before ordering?

Compare:

• the mesh dimensions with the size of the opening,
• the available mounting space on the frame,
• the colour of the screen,
• the direction in which the window or door opens,
• the positions of handles, hinges, vents and blinds,
• the condition of the surface intended for the adhesive tape.

Accurate measurements and careful installation will help achieve a better fit for the chosen window or doorway.

FAQ – Frequently Asked Questions

1. What is an insect screen used for?
It helps reduce the number of mosquitoes, flies, midges and other insects entering through an open window or door.

2. Which screen sizes are available?
The range includes 150 × 130 cm and 180 × 150 cm mesh panels.

3. Can the insect mesh be trimmed?
Yes. The polyester material can be cut to fit the selected window or door.

4. Does installation require drilling?
No. These screens attach using self-adhesive hook-and-loop tape.

5. How should the frame be prepared?
The mounting surface should be clean, dry and free from grease. Use a cleaning product suitable for the frame material.

6. Can the screen be removed?
Yes. The mesh can be detached for window cleaning, washing or off-season storage and then fitted again.

7. Can the screen be installed on a balcony door?
Yes, provided its size and the door construction allow correct installation. Check the handle, hinges and everyday access before fitting it.

8. Is the mesh washable?
The available screens can be washed at 30°C. Remove the mesh from the mounting tape before cleaning.

9. Should I choose white or black mesh?
White mesh coordinates well with light frames, while black may suit darker window and door frames. The choice depends on the preferred visual effect.