Irrigation

Garden watering systems for different areas

The watering method should reflect the size of the garden, plant layout and available water flow. A hose with a spray gun or wand works well for manual watering. A lawn sprinkler covers a broader area, while a line of small nozzles can be arranged along beds, hedges or greenhouse structures.

The current range includes standard and expandable hoses, reel-mounted sets, connectors, multi-pattern spray guns, rotating sprinklers and configurable misting systems.

Choosing the correct garden hose

Measure from the tap to the farthest watering point, following the route around beds, buildings and outdoor furniture. Allow a modest amount of extra length. A hose that is too short requires additional joints, while excessive length adds weight and makes storage less convenient.

Available options include 1/2-inch hoses, reinforced multi-layer designs, expandable hoses and sets supplied on a reel or stand. One compact kit contains a 10 m PVC hose, spray gun and quick connector.

Expandable hose listings may show both the unpressurised and extended length. Actual extension depends on water pressure and operating conditions.

Hose reels and expandable designs

A reel keeps the hose organised and reduces loose loops during storage. The range includes reel-mounted hoses and a separate stand designed for up to 30 m of 1/2-inch hose.

Expandable hoses occupy less space when drained, but they should be kept away from sharp edges and rough surfaces. Always release the pressure and drain the hose before storage.

Quick connectors and tap adapters

Every part of the watering line must match the relevant diameter and connection type. The range includes quick connectors for 1/2 and 3/4-inch hoses, Y or T connectors, nipples and kits with tap adapters.

A tap thread size is not necessarily the same measurement as the hose diameter. One available tap adapter supports 1/2 and 3/4-inch threads by using the included reducer.

After assembly, open the water slowly and inspect every joint. Leaks may indicate an incorrectly seated connector, mismatched size or worn seal.

Multi-pattern spray guns

A garden spray gun changes the water pattern without repeatedly returning to the tap. Depending on the model, options may include shower, mist, flat and concentrated jet settings.

The range includes spray guns with 3, 7, 9 or 10 patterns. A verified seven-pattern model has a trigger lock, while a nine-pattern version includes a dispenser. Gentler patterns suit delicate plants, while more concentrated jets are intended for appropriate cleaning tasks.

Only use products permitted by the dispenser instructions and follow their labels. Flush the equipment thoroughly after use.

Telescopic watering wands

A watering wand extends the user’s reach into deep beds, raised containers and areas behind other plants. The available telescopic model has ten spray settings and an adjustable shaft.

Confirm that the telescopic lock is engaged and that the hose connection is secure before turning on the water.

Rotating lawn sprinklers

A ground sprinkler distributes water without the hose being held by hand. The range includes 360-degree rotating models with three arms, on either a standing base or ground spike.

The verified three-arm sprinkler is water-driven. Its product information states operation from 1.5 bar and coverage up to 180 m². Actual coverage depends on pressure, flow rate, nozzle position, wind and terrain.

Position the sprinkler so that it waters the intended planting area rather than paving, walls or roads. Shorter repeated cycles may be preferable if water begins to pool.

Misting and irrigation kits in three lengths

Configurable kits are available in 10, 15 and 20 m lengths. Their adjustable nozzles can deliver a fine mist or a directed spray and can be arranged along beds, greenhouses, patios or hedges.

The 20 m version contains 25 nozzles, 25 connecting pieces, mounting clips, cable ties, a quick connector and a tap connection. The word “automatic” in the listing refers to water distribution once the supply is running; no timer is confirmed as part of the set.

Lay out the system temporarily and test the spray direction before fixing every section in place.

Planning a simple irrigation layout

Check:

• tap location and thread size;
• required hose diameter and length;
• connector types and quantities;
• available pressure and flow rate;
• lawn area and bed layout;
• watering requirements of the plants;
• how the system will be drained and stored.

Plants with significantly different water needs may require separate watering zones or schedules.

Winter storage and maintenance

Disconnect and drain hoses, spray guns, sprinklers and irrigation lines before freezing weather. Water trapped inside components can expand and damage them.

Store equipment dry and avoid tight bends in hoses. Inspect seals, threads, connectors and nozzles before returning the system to use.

FAQ – Frequently Asked Questions

What watering equipment is available?

The range includes garden hoses, reels, stands, spray guns, watering wands, sprinklers, quick connectors, tap adapters and misting kits in 10, 15 and 20 m lengths.

How should I calculate the hose length?

Measure the complete route from the tap to the farthest watering point and allow for obstacles and bends. Add a small margin without choosing unnecessary excess length.

What do 1/2 and 3/4 inch refer to?

They may describe a hose diameter or tap thread. These are different measurements, so check the individual product specification.

Does the tap connector fit both 1/2 and 3/4-inch threads?

The verified adapter includes a reducer for the two stated thread sizes.

Which spray pattern is suitable for delicate plants?

Choose a mist or gentle shower setting. Avoid directing a strong concentrated jet at young seedlings.

What area can the rotating sprinkler cover?

The verified three-arm model is rated for up to 180 m² and operation from 1.5 bar. Actual performance depends on the installation and weather.

How many nozzles are included with the 20 m kit?

The verified 20 m system contains 25 adjustable nozzles and 25 connecting components.

Does the irrigation kit include a timer?

No timer is listed with the verified set. A compatible controller would need to be selected separately for scheduled operation.

How should watering equipment be prepared for winter?

Turn off the supply, drain every component, allow it to dry and store it where it will be protected from freezing.